This NMEA 2000 S5 black water tank level sensor has a sensor length of 250 mm and is intended for electronic level monitoring of black water in marine tank installations. The sensor integrates directly into an NMEA 2000 network and is compatible with both 12 V and 24 V electrical systems.
The sensor is pre-programmed for black water, allowing the connected instrument to identify the tank application type. The level is displayed as a percentage by default. When configured with the tank's volume, the level can instead be displayed in liters, and multiple tanks with the same fluid can be assigned individual tank numbers.
The housing is made of stainless steel and has IP65 protection. Mounting is done using an international SAE 5-hole flange in S5 design. The sensor's connector is attached to a T-piece in the NMEA 2000 network, and the locking ring is tightened properly to ensure a waterproof network connection.
The fluid type, tank number, and tank capacity can be reprogrammed subsequently via the NMEA 2000 network using the compatible programmer with item no. 27.165.00. The sensor can thus be configured for black water, grey water, fresh water, or fuel without direct physical access to the sensor itself.
The nominal power is 0.72 W, the operating current is 0.05 A, and the specified operating temperature range is from −40 °C to +85 °C.
Key featuresPre-programmed for black water tank
Sensor length: 250 mm
NMEA 2000 output
Compatible with 12/24 V installations
International SAE 5-hole flange, S5
Stainless steel housing
IP65 protection
Configurable for tank type, tank number, and tank capacity
Reprogrammable with programmer 27.165.00