This NMEA 2000 S5 water level sensor with a sensor length of 250 mm is intended for measuring levels in water and freshwater tanks. The sensor is programmed as a water version and integrates into an NMEA 2000-based level monitoring system.
The tank level can be communicated as a percentage. Once the tank capacity is configured, a compatible instrument can instead display the calculated volume in liters. In installations with multiple water tanks, the sensor can be assigned a tank number so that the tanks are identified separately on the network.
The sensor features a stainless steel housing and IP65 protection. It is compatible with 12/24 V installations and is mounted vertically through an international SAE 5-hole flange, also referred to as an S5 flange.
Fluid type, tank number, and tank capacity can be subsequently configured using the separate NMEA 2000 programmer with item no. 27.165.00. The programming tool is used for setup and reprogramming and is not required for the normal operation of a correctly configured sensor.
Before installation, ensure that the sensor length of 250 mm matches the depth of the tank and that the tank has the required international SAE 5-hole flange. The connected instrument must support level information from the NMEA 2000 network.
Key featuresWater version for water and freshwater tanks
Sensor length: 250 mm
NMEA 2000 output signal
Compatible with 12/24 V installations
Stainless steel housing
IP65 protection
International SAE 5-hole flange
Can be configured with tank capacity and tank number