This NMEA 2000 water level sensor with S5 flange has a sensor length of 150 mm and is programmed for measuring water levels in onboard tanks. The sensor transmits the level information via an NMEA 2000 network and is compatible with both 12 V and 24 V installations.
The sensor is mounted with an international SAE 5-hole flange, also referred to as S5. The housing is made of stainless steel, and the ingress protection rating is IP65. The correct sensor length must be chosen based on the tank's depth and the specific installation.
As a water variant, the sensor is configured for a water tank. If the tank volume is provided at the time of ordering or programmed subsequently, the tank level can be displayed in liters instead of percent. When installing multiple tanks with the same fluid type, each sensor can also be assigned a tank number, for example, tank 1, 2, or 3.
The sensor configuration can be changed with the NMEA 2000 programming tool, item no. 27.165.00. The tool can be used to select the tank type, assign a tank number, and set the tank capacity. The sensor can be reprogrammed for, among other things, fresh water, gray water, black water, or fuel.
Integration requires an existing NMEA 2000 network. The sensor is also documented as a possible transmitter for selected modular fresh water tanks with a corresponding 5-hole flange, but the 150 mm length must always be verified against the specific tank.
Important featuresProgrammed for water level measurement
Sensor length: 150 mm
NMEA 2000 output
Compatible with 12/24 V installations
International SAE 5-hole flange (S5)
Stainless steel housing
Ingress protection: IP65
Can be configured with tank number and tank capacity
Can display level in liters after correct configuration
Can be reprogrammed with programming tool 27.165.00