This NMEA 2000 water level sensor with S5 flange is a 225 mm level sensor for electronic measurement of the fluid level in a boat's water or freshwater tank. The sensor transmits level data to compatible instruments via the boat's NMEA 2000 network.
The sensor is made with a stainless steel housing and is mounted in the tank through an international SAE 5-hole S5-type flange. The 225 mm length is the sensor's variant-specific product dimension. Tank depth, mounting position, and required clearance must therefore be checked before installation.
The electrical design is compatible with both 12 V and 24 V systems. IP65 ingress protection rating protects the housing against dust ingress and water jets, making the sensor suitable for installation in a maritime tank system.
The sensor is configured as a water variant and can normally provide the tank level as a percentage value. Once the tank's capacity has been entered, a compatible system can instead display the calculated fluid volume in liters. If there are multiple water tanks on the same network, each sensor can be assigned a separate tank instance, for example, tank 1, 2, or 3.
Tank type, tank instance, and tank capacity can be changed with the NMEA 2000 programming tool, item no. 27.165.00. The sensor's tank type can thus be reprogrammed as needed, but this variant is supplied as a sensor for water.
Key featuresWater variant for water and freshwater tanks
Sensor length of 225 mm
NMEA 2000 output signal
Compatible with 12 V and 24 V systems
S5 flange with international SAE 5-hole pattern
Stainless steel housing
IP65 ingress protection rating
Can be configured with tank capacity and tank instance
Can display tank contents in liters when capacity is programmed