Form-fitting RIB boat cover with opening for roll bar from Oceansouth is a Style A cover for RIB boats measuring 8.8–9.1 m with a maximum beam of 3.1 m. The MA 602-19 is designed for boats with a center console and stern arch and can be used for covering during storage and trailering.
The cover is made of grey ATLAS marine fabric, 100% dope-dyed polyester with a fabric weight of 280 g/m² and a PU coating. The fabric is breathable, UV-resistant, and water-repellent with a water column of at least 1500 mm. The UV protection is rated as UPF 50+, and the fabric is measured at over UPF 80.
The rear opening provides space for a potential roll bar, A-frame, or stern arch. The opening is closed with a zipper and Velcro, while two Cam Cleats make it easier to tension the cover evenly. Double-lapped seams increase the construction's strength during use and trailering.
The cover has a nominal length of 10.5 m and a nominal width of 5.1 m. These dimensions are the cover's actual coverage measurements. When selecting and fitting, the measurements must be checked over the boat's highest points and fittings, as the height of the console and stern arch affects the required fabric length and width.
This Style A variant is intended for RIB boats with a center console and stern arch. It is not documented for boats with a T-Top, which require a different cover construction.
Key featuresFor RIB boats with a length of 8.8–9.1 m and max beam of 3.1 m
Oceansouth model MA 602-19 in the MA602 / Style A series
Cover dimensions: 10.5 × 5.1 m
ATLAS fabric, 100% polyester, 280 g/m²
PU-coated, breathable, UV-resistant, and water-repellent
Water column of at least 1500 mm and UV protection UPF 50+
Rear opening for roll bar, A-frame, or stern arch
Zipper, Velcro, and 2 Cam Cleats for fastening
Double-lapped seams
Suitable for trailering
