This oil temperature gauge is an analog panel instrument for monitoring oil temperature from 50 to 150 °C. The variant has a black dial, a polished bezel, and can be used in electrical systems with 12 or 24 V DC.
The instrument features selectable red or yellow backlighting, allowing the lighting color to be matched to the other instrumentation. The orange wire is used for red lighting, while the yellow wire is used for yellow lighting. The five-pin connection also includes a blue wire for ground, a red wire for positive supply, and a black wire for the external temperature sensor/sender.
The outer diameter of the instrument is 57 mm, and the installation depth is 45 mm. The product table indicates a mounting hole of Ø51 mm, while the installation guide specifies a panel cutout of Ø52 mm. There must be at least 55 mm of clear space behind the panel, and the instrument can be mounted in panels with a thickness of 0.5–20 mm.
The instrument is flush-mounted from the front of the panel and secured from behind with a fastening ring. An alignment tab on the instrument housing must be positioned correctly during marking and mounting. The wiring harness connects to the port on the back of the instrument.
For installation in a 24 V system, the shown voltage-reducing circuit must be used. The connection diagram specifies a 150 Ω resistor in the positive supply and a 2 kΩ resistor in the connection for the selected instrument lighting. The switch for the lighting circuit is not included.
The gauge requires an external oil temperature sensor/sender. The sensor's thread, terminal type, and electrical characteristics must be checked against the engine and installation before selection. Compatibility with specific engine manufacturers or engine models is not specified.
The instrument complies with the EMC Directive 2014/30/EU as well as the standards EN 55022:2010 + AC:2011, EN 55024:2010, EN 61000-3-2:2006 + A1:2009 + A2:2009, and EN 61000-3-3:2013. Alternative versions include item no. 27.320.09 with a black bezel and item no. 27.322.09 with a white dial and a polished bezel.
Key featuresAnalog measurement of oil temperature from 50 to 150 °C
For 12/24 V DC systems
Black dial with polished bezel
Selectable red or yellow backlighting
Outer diameter: 57 mm
Required panel cutout: Ø52 mm
Installation depth: 45 mm
For panel thickness of 0.5–20 mm
Flush mounting with fastening ring
Requires external oil temperature sensor/sender