This oil pressure sender with earth return is intended for electrical monitoring of engine oil pressure. The sender has a measuring range of 0–10 bar and converts the oil pressure into a resistive signal of 10–184 Ω for a compatible analog oil pressure gauge.
The sender can be used in systems with a nominal voltage of 6–24 V. The gauge must be designed for a measuring range of 10 bar, a sender characteristic of 10–184 Ω, and a common earth. It can be used with compatible gauges from manufacturers such as Guardian and VDO, provided the gauge's signal range, pressure range, and electrical configuration match.
The mechanical connection is 1/8"-27 NPT, and the sender is mounted by screwing it into a suitable threaded port in the engine or installation's oil pressure system. The electrical design has one signal terminal and an earth return instead of a separate isolated return pole.
This variant is without an alarm contact and therefore does not provide a separate warning signal for low oil pressure. Before installation, verify that the thread, gauge range, resistance characteristic, and earth configuration match the installation.
Key featuresMeasuring range: 0–10 bar
Resistive output signal: 10–184 Ω
Nominal system voltage: 6–24 V
Thread: 1/8"-27 NPT
Electrical design: One signal terminal with earth return
Isolated return pole: No
Alarm contact: No
Mounting: Screw-in to a suitable oil pressure port