This oil pressure gauge is a round, analog pointer instrument for monitoring engine oil pressure via an external electrical pressure sender. This variant features a white dial, a polished bezel, and a measuring range of 0–5 bar. The dial also has a secondary scale up to 75 psi.
The instrument can be used in 12 or 24 V electrical systems. The backlight can be selected as red or yellow by connecting the orange or yellow wire, respectively. The red wire is used for the positive supply, the blue for ground, and the black is connected to the pressure sender. When installing in a 24 V system, the prescribed voltage-reducing resistors must be used.
The gauge has an outer diameter of 57 mm and an instrument depth of 45 mm. The panel hole is specified as Ø51 mm, while the installation manual indicates Ø52 mm. Therefore, please check the actual instrument or a physical mounting template before machining the panel. There must be at least 55 mm of free space behind the panel.
The instrument is mounted through the front of the panel and secured from behind with a threaded fastening ring. It can be mounted in panels with a thickness of 0.5–20 mm. An alignment tab on the instrument housing must be positioned correctly so that the scale faces the right way after mounting.
The instrument features IP67 protection, a technopolymer bezel, and convex anti-fog glass. The design is intended for marine and engine instrumentation where a compact, panel-mounted display of oil pressure is required.
Key featuresAnalog oil pressure display from 0–5 bar
Secondary scale from 0–75 psi
For 12/24 V electrical systems
Selectable red or yellow backlight
White dial with polished bezel
Outer diameter: 57 mm
Instrument depth: 45 mm
Panel hole: Ø51–52 mm – check the measurement before cutting
Panel thickness: 0.5–20 mm
IP67 protection