This oil pressure gauge is an electric engine instrument for monitoring engine oil pressure on boats. The instrument has a 0–5 bar scale, black dial, and black front ring, and is intended for installation in a marine instrument panel.
The gauge is powered by 12/24 V DC and displays the pressure via an electric signal from an external 5 bar oil pressure sensor. The compatible sensor group has a signal range of 10–184 Ω. The dial has selectable red or yellow backlighting, allowing the illumination to be matched to the rest of the instrument panel.
The instrument housing is made of technopolymer, while the front ring is made of AISI 316 stainless steel with a black finish. The clear, convex lens is anti-fog treated, and the instrument has an IP67 protection rating.
The external instrument diameter is 57 mm, and the installation depth is 45 mm. The product specification states a hole diameter of 51 mm, while the installation instructions specify a panel cutout of Ø52 mm. The instrument can be mounted in panels with a thickness of 0.5–20 mm, and there must be at least 55 mm of free space behind the panel.
The instrument is inserted through the panel from the front and secured with a ring from the back. An alignment tab helps to orient the instrument correctly. The rear wiring harness is connected via a bayonet connector. The wire colors are black for the oil pressure sensor, red for positive supply, blue for ground/negative, yellow for yellow illumination, and orange for red illumination. For 24 V installations, the prescribed additional series/voltage resistors must be used.
A separate 5 bar sensor with a thread matching the engine's oil pressure outlet is required. Documented sensor options include item nos. 27.500.00, 27.561.01, and 27.565.01 with 1/8-27 NPT thread, as well as 27.561.00 and 27.565.03 with M10×1 thread. The variants differ in, among other things, electrical insulation and alarm contact.
Key featuresMeasuring range: 0–5 bar
Instrument supply: 12/24 V DC
Black dial and black front ring
Selectable red or yellow backlighting
External diameter: 57 mm
Installation depth: 45 mm
Panel cutout: Ø52 mm according to installation instructions
Anti-fog treated, convex lens
IP rating: IP67
External 5 bar oil pressure sensor required