This flush-mounted 90° fuel tank vent in chrome-plated brass is designed for venting marine fuel tanks. The variant features a right-hand hose nozzle for a vent hose with a 20 mm nominal inner diameter.
The angled hose nozzle leads the hose 90° behind the mounting surface. The right-hand version is chosen when the hose needs to be routed to the right, relative to the product's mounting orientation. The vent can be flush-mounted through a hull side, a panel, or a similar mounting surface.
The visible head has an outer diameter of 50 mm, while the mounting body has a diameter of 40 mm. The 40 mm diameter describes the mounting body and is not specified as a definitive cutout dimension. The vertical dimension below the mounting surface is 100 mm, and the horizontal extension from the vertical centerline to the end of the hose nozzle is 68 mm. The body dimension immediately below the mounting surface is 18 mm.
The construction is made according to the requirements of UNI EN ISO 21487 for permanently installed fuel tanks and fuel systems in small craft. The chrome-plated brass gives the vent a metallic surface on the visible part.
Key featuresFlush-mounted fuel tank vent
Right-hand 90° hose nozzle
Hose connection: Ø 20 mm
Material: Chrome-plated brass
Visible head: Ø 50 mm
Mounting body: Ø 40 mm
Vertical dimension below mounting surface: 100 mm
Horizontal extension: 68 mm
Designed according to the requirements of UNI EN ISO 21487
