This professional 70 W wiper motor for wiper arms and blades up to 800 mm is a 12 V DC motor for pantographic windscreen wiper systems on boats. The motor is supplied without a wiper arm and wiper blade, which are selected separately according to the installation dimensions.
The motor has two speeds of nominally 30 and 45 rpm, as well as a standard wiping angle of 80° ±2°. The operating torque is 9 Nm, while the maximum torque is 35 Nm. Automatic parking returns the wiper to the parking position when the system is switched off.
The standard setup has parking to the left. The parking direction can be converted to the right by turning the internal crank 180°. The motor has two output shafts with a 60 mm centre distance and a mounting length of 60 ±1 mm. The shafts have a 1:3 taper, M8 end thread, and 2 × M20×1 mounting threads.
The electrical connection is made via a DIN connection with connector type DJ7061-6.3-11 and five wires for parking, high speed, low speed, positive supply, and negative/ground. At the test voltage of 13.5 V, the no-load current consumption is at most 2.5 A at low speed and at most 3 A at high speed.
The motor housing has a diameter of Ø62 mm, and the maximum extension in the shown projections is approximately 213 × 119 × 205 mm. The wiper shafts are made of stainless steel, and the shaft bushings are made of copper. The noise level is up to 50 dB.
The product is covered by an EU Declaration of Conformity for Directive 2014/30/EU and standard EN 60034-1:2010/AC:2010. Documented accessories include a telescopic pantograph arm 19.190.01 in 650/800 mm as well as wiper blades with window washing function in 600 mm (19.194.01), 700 mm (19.194.02), and 800 mm (19.194.03).
Key features12 V DC and 70 W
For wiper arms and wiper blades up to 800 mm
2 speeds: 30/45 rpm
Wiping angle: 80° ±2°
Automatic parking
Operating torque: 9 Nm
Max. torque: 35 Nm
60 mm centre distance and 60 mm mounting length
DIN connection with 5 wires
Arm and wiper blade ordered separately