This pump impeller Ref. 206.GT is a flexible replacement impeller made of oil-resistant nitrile rubber (NBR) for cooling water, seawater, and liquid pumps on inboard engines and other marine installations. The impeller has 8 flexible blades, profile 11, and is supplied in a GT version with a gasket and plug/cover.
The impeller has an external diameter of 65 mm, a width of 50.2 mm, and a hub dimension of 14.29 / 16 mm, specified as internal and external dimensions respectively. The hub features a splined connection corresponding to profile number 11. When replacing, the diameter, width, hub dimension, number of blades, and profile must match the existing impeller.
The spare part cross-references to, among others, Jabsco 920-0003, Johnson Pump 09-1028-B-9, and Volvo Penta 877061-2, 875593-2, and 3841697-2. In addition, there are documented cross-references from AIFO, Oberdorfer, Caterpillar, Yamaha/Solé, Perkins, Renault, and DJ Pump, among others. Note that this variant is manufactured in NBR and therefore should not be readily equated with neoprene variants with the same nominal dimensions and hub profile.
Documented cross-references include Jabsco 920-0003, Johnson Pump 09-1028-B-9, AIFO 8108228, Volvo Penta 877061-2, 875593-2 and 3841697-2, Oberdorfer C7441, Caterpillar 3N1906, Yamaha/Solé 347.11.008, Perkins 24880031, Renault RC320D, and DJ Pump 001-0801N.
Johnson Pump 09-1028-B-9 is used, among others, for F7B-3000 pump 10-24209-1, F7B-3007 pump 10-24209-7, F7B-8 pump 10-24572-01, and F7B-8007 pump 10-24572-51. Compatibility should be determined based on the pump's original part number, hub profile, impeller dimensions, and material rather than the engine make alone.
For removal, an impeller puller, item no. 16.191.01, can be used for relevant pumps with ports up to 1", while item no. 16.191.02 is intended for relevant pumps with ports over 1". The correct puller is chosen based on the pump's size and construction.
Key features
Pump impeller Ref. 206.GT for inboard engine and marine pumps
Material: Oil-resistant nitrile rubber (NBR)
External diameter: 65 mm
Width (height): 50.2 mm
Hub dimension, internal/external: 14.29 / 16 mm
8 blades and profile number 11
Hub design: Splined hub
GT version with gasket and plug/cover
Cross-reference: Jabsco 920-0003 and Johnson Pump 09-1028-B-9
Volvo Penta references: 24139377, 21951356, 3841697, 877061, 875593, 807904, 801277, 877061-2, 875593-2 and 3841697-2
Orbitrade: ORB-15593
Stated compatible engines:
MD29, MD32, 30, 31, 40, 41, KAD32, KAD42, KAD43, KAD44, KAD300, 60, 70, 100, 120, D4, D5, D7
MD29, MD29A, AQD29, AQD29A, MD32A, AQD32A
MD30A, TMD30A, TAMD30A, AD30A, AQAD30A
MD31A, TMD31A, TAMD31A, TMD31B, TAMD31B, TMD31D, TAMD31D, TMD31L-A, TAMD31L-A, TAMD31S, TAMD31M, TAMD31M-A, TAMD31P-A, AD31, AD31A, AQAD31A, AD31B, AD31D, AD31D-A, AD31L-A, AD31P-A, AD31XD
KAD32P, KAD32P-A
MD40A, TMD40A, TAMD40A, TMD40B, TAMD40B, TMD40C, AQD40A, AQAD40A, AD40B, AQAD40B
TMD41A, TAMD41A, TMD41B, TAMD41B, TMD41D, TAMD41D, TMD41L-A, TAMD41H-A, TAMD41H-B, TAMD41P, TAMD41P-A, D41A, AD41A, AQAD41A, D41B, AD41B, AD41BJ, D41D, AD41D, D41L-A, AD41L-A, AD41P-A
KAD42A, KAD42B, KAD42P-A, KAMD42A, KAMD42B, KAMD42P-A, TAMD42B, TAMD42WJ-A
KAD43P-A, KAD43P-B, KAMD43P, KAMD43P-A, KAMD43P-B
KAD44P, KAD44P-B, KAD44P-C, KAMD44P-A, KAMD44P-B, KAMD44P-C
KAD300A, KAD300-A, KAMD300-A
TAMD60A, TAMD60B, TAMD60C
MD70B, MD70BK, TMD70B, TAMD70B, THAMD70B, MD70C, TMD70C, TAMD70C, THAMD70C, TAMD70D, TAMD70E, AQD70B, AQD70BL, AQD70C, AQD70CL, AQD70D
MD100A*, MD100B*, TMD100A*, MD100B-CC*
MD120A*, TMD120A*, TAMD120A*, TMD120B*, TAMD120B*
D4-145I-G, D4-150A-G, D4-175I-G
D4-180I-F
D4-225A-E, D4-225A-F, D4-225I-F
D4-230A-G, D4-230I-G
D4-260A-E, D4-260A-F, D4-260D-F, D4-260I-F
D4-270A-G, D4-270I-G
D4-300A-E, D4-300A-F, D4-300A-G, D4-300D-E, D4-300D-F, D4-300I-F, D4-300I-G
D4-320A-G, D4-320I-G
D5A-B TA, D5A-T, D5A-TA
D7A-B TA, D7A-T, D7A-TA
*) bilge pump
Always check the pump and engine model, original part number, material, dimensions, hub design, and impeller profile before purchasing.
