Roca Rakego telescopic folding bracket for tables is a space-saving support bracket for drop-leaf tables, folding tables, work surfaces, shelves, and other foldable installations. The telescopic design locks in the unfolded position and can be released so the panel easily folds down when not in use. The bracket is suitable for boats, motorhomes, caravans, vehicle cabins, as well as café, shop, and office fixtures.
The brackets are available with various B-dimensions from 150 to 549 mm and tube diameters of Ø20, Ø25, and 16 mm depending on the variant. The A-dimension varies from 20–50 mm, and the C-dimension from 14–137 mm. The diagonal or drawing length varies from approx. 176 to 585 mm in the unfolded position and from approx. 110 to 368 mm in the compressed position. One variant is intended for folding panels up to 600 mm.
The load is stated per bracket and depends on the variant: P1 is up to 60, 120, or 140 kg with evenly distributed load, while P2 is up to 30, 60, or 80 kg with point load. The P1 and P2 values must not be added together. The required number of brackets, fastening, panel size, substrate, and the placement of the load must be dimensioned according to the specific installation.
The construction is made of natural anodized AA6061 aluminum with components in AISI 304 stainless steel. It is lightweight, robust, and corrosion-resistant. Mounting is done with a wall plate and an upper mounting plate under the tabletop. Depending on the variant, the mounting holes are Ø5.1 mm, the wall brackets are approx. 50 × 22 or 50 × 28 mm, and the width of the mounting flanges as well as the hole spacing vary. See the dimension drawing for the selected variant before mounting.
Matching Rakego hinges can be used as separate accessories: manufacturer part nos. 388000 and 388001. The standard version is supplied without built-in damping, and the brackets are sold individually.
Key features
Telescopic and collapsible construction
Locks in unfolded position
B-dimension: 150–549 mm
P1 load: max. 60–140 kg per bracket
P2 load: max. 30–80 kg per bracket
AA6061 aluminum
AISI 304 stainless steel
Ø5.1 mm mounting holes
For drop-leaf tables, folding panels, and work surfaces
