This rudder angle indicator is an analog instrument for displaying the rudder position. This variant features a black dial, a polished front bezel, and an external front diameter of 57 mm. The instrument uses a rudder angle signal of 0–190 Ω and can be connected to 12 or 24 V electrical systems.
The dial can be backlit with either red or yellow light so that the display can be matched to other instrument lighting. The orange wire is used for red lighting, while the yellow wire is used for yellow lighting; only one of the lighting wires should be connected. The red wire is the positive supply, the blue is ground/negative, and the black is connected to the rudder angle sensor.
The instrument has a technopolymer housing, a polished front bezel made of AISI 316 stainless steel, and a transparent, convex anti-fog lens. The construction is IP67 rated, which protects the instrument against dust ingress and temporary immersion in water.
Connection is made via a pre-calibrated plug connection with a bayonet fitting on the back of the instrument. When installed in a 24 V system, the prescribed 150 Ω and 2 kΩ series resistors must be used as shown in the wiring diagram.
The instrument is mounted from the front of the panel and secured from the back with a fastening ring. The catalog hole diameter is 51 mm, while the installation manual specifies a panel cutout of Ø52 mm. The panel can be 0.5–20 mm thick, and there must be at least 55 mm of free space behind the panel for the instrument, plug, and wiring. The cataloged depth of the instrument itself is 45 mm.
During installation, the positioning tab of the instrument housing must be marked and adjusted correctly before cutting the panel. The instrument is designed for a 0–190 Ω rudder angle signal from a suitable VDO-type sensor.
Key featuresAnalog display of rudder position
Signal range: 0–190 Ω
Supply: 12/24 V
Choice between red and yellow backlighting
Black dial and polished front bezel
Front diameter: 57 mm
Panel cutout: Ø52 mm
Panel thickness: 0.5–20 mm
IP67-rated construction
Front bezel of AISI 316 stainless steel