Rudder angle indicator with a black dial and black bezel for analog display of the rudder position on the boat's instrument panel. The instrument operates at 12/24 V DC and connects to a separate rudder angle sensor with a signal range of 0–190 Ω.
The analog scale provides a direct overview of the rudder position. The dial features optional red or yellow backlighting, allowing the display to be matched to other instrument lighting. The transparent, convex lens is anti-fog treated, and the instrument has an IP67 protection rating.
The instrument has an external diameter of 57 mm and an indicated depth of 45 mm. It is mounted from the front into a round panel hole of Ø52 mm and secured with a ring from the rear. There must be at least 55 mm of clear space behind the panel, and the mounting is designed for a panel thickness of 0.5–20 mm. A positioning tab helps to orient the instrument correctly.
The wiring harness connects to the back of the instrument with a bayonet connection. The yellow wire is used for yellow lighting, while the orange wire is used for red lighting. The red wire is the positive supply, blue is ground/negative, and black is connected to the sensor. For 24 V operation, the installation requires series resistors; the wiring diagram specifies 2 kΩ and 150 Ω.
The instrument housing is made of technopolymer, while the bezel is made of AISI 316 stainless steel with a black finish. The instrument is pre-calibrated. Rudder angle sensor 27.330.01 is used for one indicator, while 27.330.02 is intended for installations with two indicators. Connecting rod 27.330.10 is documented as an optional accessory for these sensors.
Key featuresAnalog display of rudder position
Black dial and black bezel
12/24 V DC
Sensor signal: 0–190 Ω
Optional red or yellow backlighting
External diameter: 57 mm
Panel mounting in Ø52 mm hole
Protection class: IP67
Anti-fog treated, convex lens
Compatible with sensors 27.330.01 and 27.330.02