S3 NMEA 2000 fuel level sensor in 250 mm version detects the fuel level in a tank and transmits level data to a connected instrument or display via the vessel's NMEA 2000 network. This variant is programmed for use with fuel.
The sensor is made of stainless steel and is suitable for both 12 V and 24 V installations. The external enclosure protection is IP65, and installation is via an international S3 connection with threaded tank mounting.
The tank type, tank number, and tank capacity can be configured. If the tank capacity is registered, the connected instrument can display the remaining amount in liters instead of just as a percentage. In the case of multiple fuel tanks, each sensor can be assigned an individual tank number, for example, tank 1, 2, or 3.
Subsequent reprogramming is performed with the separate NMEA 2000 programming tool with item no. 27.165.00. The tool can change the tank type, assign a tank number, and set the tank capacity. The sensor does not have a documented built-in display; the level information is displayed on a compatible instrument in the NMEA 2000 network.
When mounting on a tank with a five-hole S5 flange, the separate S5-to-S3 mounting adapter with item no. 52.746.10 can be used. Check the sensor length, the tank's mounting interface, and the required network installation before mounting.
Key featuresFuel version with 250 mm sensor length
NMEA 2000 output for tank level transmission
Suitable for 12 V and 24 V installations
Made of stainless steel
External enclosure protection: IP65
International S3 connection with threaded tank mounting
Programmable tank type, tank capacity, and tank number
Can be configured for display in liters rather than percent