This S3 NMEA 2000 fuel level sensor with a length of 350 mm is intended for electronic monitoring of the level in a fuel tank. The sensor transmits the tank level via NMEA 2000 and can be used in both 12 V and 24 V systems.
The sensor is supplied as a fuel version and can be configured so that the connected instrument correctly identifies the tank's application. Once the tank capacity has been programmed, the tank contents can be displayed in liters instead of percent. In installations with multiple fuel tanks, the sensors can also be assigned individual tank numbers, for example, tank 1, 2, or 3.
The construction is made of stainless steel and has external IP65 protection. The international S3 flange provides a standardized mounting, while the variant-specific sensor length of 350 mm must be matched to the actual tank installation.
The tank type, tank number, and tank capacity can subsequently be changed using the NMEA 2000 programming unit with item no. 27.165.00. The sensor can be reprogrammed for fuel, fresh water, gray water, or black water, but this variant is intended for fuel as standard.
If the tank is prepared for a five-hole S5 flange, the mounting adapter with item no. 52.746.10 can be used for the transition to the S3 sensor. The adapter is an accessory and is not documented as part of the delivery.
Key featuresFuel level sensor with NMEA 2000 output
Sensor length: 350 mm
Suitable for 12 V and 24 V systems
International S3 flange
Stainless steel construction
External protection: IP65
Programmable tank type, tank capacity, and tank number
Display in percent or liters depending on configuration