This S3 NMEA 2000 fuel level sensor is a vertical tank sender for measuring the level in a fuel tank. This variant has a sensor length of 450 mm and provides level data to an NMEA 2000 network.
The sensor is made of stainless steel and is mounted using an international S3 flange. It can be used in both 12 V and 24 V systems, and its external protection is rated as IP65.
The sensor is delivered configured for fuel. Tank type, tank number, and tank capacity can be programmed so that multiple tanks with the same fluid can be identified as, for example, tank 1, 2, or 3. Once the tank capacity is configured, the level can be displayed in liters instead of just as a percentage on a compatible NMEA 2000 instrument.
For subsequent configuration and reprogramming, the NMEA 2000 programming tool with item no. 27.165.00 can be used. With this tool, the sensor can be set for fuel, fresh water, gray water, or black water, and the tank number and tank capacity can be changed.
If the tank is prepared for an international S5 flange with five holes, the documented S5-to-S3 mounting adapter with item no. 52.746.10 can be used. The adapter is not necessary for an existing S3 installation.
Key featuresFuel variant with 450 mm sensor length
NMEA 2000 output
For 12/24 V systems
International S3 flange
Made of stainless steel
IP65 external protection
Programmable tank type, tank number, and tank capacity
Option for level display in percent or liters after configuration