This S3 NMEA 2000 grey water tank level sensor has a sensor length of 550 mm and is designed for vertical liquid level measurement in marine grey water tanks. The sensor provides level information via NMEA 2000 and is suitable for both 12 V and 24 V installations.
The sensor is programmed for grey water by default, so the tank application type can be identified in the connected NMEA 2000 system. When ordering, the tank capacity can be specified so that a compatible instrument can display the volume in liters instead of just as a percentage value. If there are multiple grey water tanks on board, the sensor can also be assigned a tank number such as tank 1, 2, or 3.
The construction is made of stainless steel and has an external IP65 protection rating. Mounting is performed using an international 3-hole SAE S3 flange. The nominal sensor length of 550 mm is the sensor length of the product and must be selected in relation to the specific tank installation.
The configuration can be changed after installation. With the NMEA 2000 programming tool, item no. 27.165.00, the liquid type can be reprogrammed to black water, grey water, fresh water, or fuel, and the tank capacity can be added or changed. The programming tool is not included.
For tanks with an international 5-hole/S5 flange, the mounting adapter, item no. 52.746.10, can be used for conversion from S5 to S3. The adapter is relevant for this flange type and is not documented as included.
Key featuresProgrammed for level control in grey water tanks
NMEA 2000 output signal
Sensor length: 550 mm
Suitable for 12 V and 24 V systems
Made of stainless steel
External protection: IP65
International 3-hole SAE S3 flange
Can be configured with tank capacity and tank number
Can be reprogrammed with tool 27.165.00