This S3 NMEA 2000 blackwater level sensor has a sensor length of 350 mm and is intended for electronic level measurement in a boat's blackwater or sewage tank. The sensor is supplied pre-programmed for blackwater and transmits the tank level to a connected NMEA 2000 system.
The sensor is suitable for installations with 12 or 24 V onboard systems. The level is displayed by default in percentage. Once the tank capacity is entered, the system can instead indicate the tank content in liters. The sensor can also be assigned a tank number so that multiple tanks with the same fluid type can be identified separately.
The construction is made of stainless steel and has external protection with an IP65 ingress protection rating. The S3 version is a threaded mount sensor type. The sensor length is 350 mm; the precise reference geometry for the length measurement is not specified.
The configuration can be subsequently changed with the separate NMEA 2000 programmer with item no. 27.165.00. The programming tool can be used to select fluid type, assign tank number, and enter tank capacity. The sensor can thus be reprogrammed for fuel, fresh water, or greywater, among other things, even though this variant is supplied configured for blackwater.
If the tank is prepared for a 5-hole S5 flange, the separate adapter with item no. 52.746.10 can be used for mounting the threaded S3 sensor. The adapter and programming tool are separate products.
Important featuresPre-programmed for blackwater
Sensor length: 350 mm
NMEA 2000 output signal
Suitable for 12/24 V systems
Stainless steel construction
External protection: IP65
S3 threaded mount
Display in percentage or liters after configuration
Can be assigned a tank number and reprogrammed