This S3 NMEA 2000 black water level sensor is an electronic tank level sensor in a 450 mm version for monitoring the level in a black water tank. The sensor sends level information via an NMEA 2000 network to a compatible instrument or display.
The sensor is intended for both 12 V and 24 V systems. It is supplied configured for black water and can display the tank level as a percentage. Once the tank capacity has been set, the connected system can instead display the remaining volume in liters.
The construction is made of stainless steel and has an external protection rating of IP65. The sensor uses an international S3 threaded mount with a proven 1¼″ S3 interface. The specified length of 450 mm is the sensor's variant-specific length.
When installing multiple black water tanks on the same NMEA 2000 network, each sensor can be assigned a separate tank number, for example, tank 1, 2, or 3. The sensor's fluid type, tank number, and tank capacity can be changed with the programming tool, item no. 27.165.00.
For tanks with S5/SAE 5-hole preparation, the sensor's S3 threaded mount can be adapted using the mounting flange, item no. 52.746.10. The sensor can also be reprogrammed for gray water, fresh water, or fuel, but this variant is supplied for use with black water.
Key featuresVariant for black water tank
Sensor length: 450 mm
NMEA 2000 output
Suitable for 12 V and 24 V systems
Stainless steel construction
External protection: IP65
International S3 threaded mount
Can be configured with tank type, tank number, and tank capacity
Level display in percent or liters depending on configuration