S3 NMEA 2000 black water tank level sensor with a technical length of 275 mm is designed for electronic measurement of the level in an on-board black water tank. The sensor is supplied pre-programmed for black water and integrates into an NMEA 2000 system.
The sensor is made of stainless steel and is mounted via an international S3 flange. It can be used in both 12 V and 24 V installations, and the external protection rating is IP65.
The tank level can be indicated in percent. Once the tank capacity has been configured, the volume can instead be reported in liters. The tank type, tank number, and tank capacity can be programmed so that the sensor can be adapted to the installation and uniquely identified in the system.
For installations with multiple tanks for the same fluid, the sensor can be assigned a tank number, such as tank 1, 2, or 3. The sensor can subsequently be reprogrammed for fuel, fresh water, grey water, or black water without changing its physical length or mounting interface.
For reprogramming and configuration, the NMEA 2000 programmer with item no. 27.165.00 can be used. The programmer connects to the NMEA 2000 network with a Micro-C cable and requires an available network port. For tanks with a 5-hole S5 flange, the mounting adapter with item no. 52.746.10 can be used for mounting the S3 sensor.
Key featuresProgrammed for black water tank
Technical length: 275 mm
Output: NMEA 2000
For 12/24 V systems
International S3 flange
Made of stainless steel
External protection rating: IP65
Programmable tank type, tank number, and tank capacity
Can report tank content in percent or liters