S3 NMEA 2000 water level sensor with a sensor length of 450 mm is designed for electronic level measurement in a water tank. The sensor transmits the tank level to compatible instruments via the boat's NMEA 2000 network and is suitable for 12 V or 24 V installations.
This variant is configured for water. The tank level can be displayed as a percentage, while a programmed tank capacity allows the calculated volume in liters to be shown on a compatible display. In cases of multiple tanks with the same fluid type, the sensor can also be assigned a tank number, for example, tank 1, 2, or 3.
The sensor is manufactured from stainless steel and has an external IP65 protection rating. It is mounted with an international S3 flange and has a documented sensor length of 450 mm. The design is intended for integration into marine tank and instrument systems with NMEA 2000 communication.
Fluid type, tank number, and tank capacity can be reprogrammed using the NMEA 2000 programming tool, item no. 27.165.00. Programming allows the sensor data to be adapted to the tank installation without changing the mechanical structure of the sensor itself.
For tanks prepared for a five-hole S5 flange, the mounting adapter with item no. 52.746.10 can be used to install the S3 sensor. Check the sensor length, the tank's mounting flange, and compatibility with the existing NMEA 2000 display before installation.
Key featuresWater variant for tank level measurement
Sensor length: 450 mm
NMEA 2000 output signal
Suitable for 12 V and 24 V systems
International S3 flange
Manufactured in stainless steel
External protection rating: IP65
Configurable with fluid type, tank number, and tank capacity
Option for level display in percent or liters depending on programming