This S5 fuel level sensor with NMEA 2000 is a 1000 mm electronic level sensor, supplied configured for measuring fuel in marine tanks. The sensor sends the tank level and the programmed fluid type directly to compatible instruments via the boat's NMEA 2000 network.
The level is detected using reed switch and magnetic field technology. The float moves along the sensor's vertical tube and is the only moving part of the construction. The sensor has a standard resolution of 10–21 mm and does not require a separate analog-to-NMEA 2000 converter.
The sensor is mounted vertically in the tank with an international SAE S5 5-hole flange. The flange has a 54 mm bolt circle and requires a tank opening of Ø36–42 mm as well as five M5 mounting holes. The asymmetric hole pattern helps ensure correct placement during installation.
The housing is made of SUS 316 stainless steel, while the float is made of NBR. The external protection rating is IP65. The sensor is compatible with 12/24 V installations and connects to a T-connector on the NMEA 2000 network. The connector's locking ring must be tightened correctly to ensure a watertight connection.
If the tank capacity is programmed, the connected system can display the remaining amount in liters instead of only as a percentage. In case of multiple fuel tanks on the same network, the sensors can be assigned individual tank numbers so that the tanks can be identified separately.
The sensor can be reprogrammed for fuel, fresh water, grey water, or black water. The fluid type, tank number, and tank capacity can be changed with the NMEA 2000 programming unit with item no. 27.165.00. This variant is supplied as a fuel sensor.
Important featuresConfigured for fuel measurement
Nominal sensor length: 1000 mm
Digital output via NMEA 2000
Direct network connection without separate signal converter
International SAE S5 5-hole flange
SUS 316 stainless steel housing and NBR float
IP65 protection
Compatible with 12/24 V installations
Programmable fluid type, tank number, and tank capacity