This S5 NMEA 2000 black water level sensor is a 450 mm electronic level sensor for measuring the content in the boat's black water or holding tank. The sensor is supplied configured for black water and transmits level data via an NMEA 2000 network to a compatible instrument or display.
The sensor is compatible with both 12 V and 24 V installations. By default, the level can be displayed as a percentage. Once the tank's full capacity is programmed, a compatible instrument can instead display the calculated volume in liters.
The housing is made of stainless steel and has an IP65 protection rating. It is mounted vertically in the tank via an international SAE 5-hole flange, also known as S5. The mechanical installation therefore requires a tank or adapter with a corresponding flange.
For installations with multiple tanks for the same liquid type, each sensor can be assigned an individual tank number. The sensor can also be reprogrammed for fuel, fresh water, grey water, or black water, and both tank number and tank capacity can be configured.
The programming unit with item no. 27.165.00 can be used for subsequent configuration via the NMEA 2000 network. For the network connection of the programming unit, a Micro-C NMEA 2000 cable and a free network port or T-connector are required.
Key featuresConfigured for black water tank
Sensor length: 450 mm
NMEA 2000 output signal
Compatible with 12/24 V installations
Stainless steel housing
IP65 protected
Vertical tank mounting with international SAE 5-hole flange
Can display level in percentage or liters depending on configuration
Programmable tank number, tank capacity, and liquid type