This S5 NMEA 2000 black water level sensor has a sensor length of 900 mm and is intended for electronic level monitoring in marine black water tanks. The sensor is supplied configured for black water and transmits level data via the boat's NMEA 2000 network.
The sensor is compatible with both 12 V and 24 V installations. It is mounted vertically from the top of the tank with an international SAE five-hole flange. The housing is made of stainless steel, and the IP65 enclosure rating protects against dust and water jets.
The level is displayed as standard in percent on a compatible NMEA 2000 instrument. If the tank's capacity is loaded as configuration data, the level can instead be indicated as actual volume in litres. For multiple tanks with the same fluid type, the sensors can be assigned individual tank numbers, for example tank 1, 2, and 3.
The configuration can be changed to fuel, fresh water, grey water, or black water with the related NMEA 2000 programmer, item no. 27.165.00. The programmer can also be used to load tank capacity and tank number. Integration of the programmer into the network requires a Micro-C NMEA 2000 cable and an available network port.
The specified length of 900 mm is the product dimension of the sensor. Before installation, the depth of the tank, the position of the vertical sensor, and compatibility with the SAE five-hole flange must be checked.
Key featuresFactory-programmed for black water
Sensor length: 900 mm
NMEA 2000 output signal
Compatible with 12/24 V systems
International SAE five-hole flange
Vertical mounting in the top of the tank
Stainless steel housing
Enclosure rating: IP65
Can be reprogrammed and assigned tank capacity and tank number