This S5 NMEA 2000 black water tank level sensor has a sensor length of 170 mm and is intended for vertical measurement of the level in marine black water tanks. The level information is sent via NMEA 2000 to a compatible instrument or multifunction display.
The sensor is supplied programmed for black water, so that the tank type can be correctly identified on the connected system. If the tank capacity is specified at the time of order or programmed subsequently, the level can be displayed in liters instead of just as a percentage value. Installations with multiple black water tanks can also use individual tank numbers or instances so that the tanks can be distinguished from each other on the network.
Installation is performed using an S5 flange with an international SAE 5-hole pattern. The sensor is compatible with 12 V and 24 V installations, has a stainless steel housing, and an IP65 protection rating. The sensor length of 170 mm must be selected in relation to the relevant internal dimensions of the tank.
With the NMEA 2000 programming tool, item no. 27.165.00, the sensor can be reprogrammed for black water, gray water, fresh water, or fuel. The tool can also be used to set the tank capacity and tank number via the boat's NMEA 2000 network.
Key featuresProgrammed for level measurement in black water tanks
Sensor length: 170 mm
NMEA 2000 output signal
Vertical mounting with S5 flange and SAE 5-hole pattern
Compatible with 12/24 V systems
Stainless steel housing
IP65 protection rating
Can be reprogrammed with programming tool 27.165.00
Supports tank capacity in liters and individual tank numbers