Solas aluminum propeller for Suzuki outboard motors in size 10 x 14 is a 3-blade, right-hand rotation Amita 3 propeller for select 20-30 hp motors. The propeller has a diameter of 10″, a pitch of 14″, and a splined connection with 10 splines.
The propeller is compression-molded in aluminum and has strong blades developed for good acceleration and top speed. The black high-gloss lacquered surface protects the aluminum construction and gives the propeller its characteristic finish.
The fixed-hub construction has a traditional, factory-installed, and pressed-in rubber hub. Therefore, a separate Rubex hub kit is not required. The rubber hub is designed to yield upon heavy impact, thereby reducing stress on the motor's lower unit.
The propeller is intended for motors with a 3″ gearcase, 10-tooth propeller shaft, and through-propeller exhaust. It fits the documented Suzuki DT20, DT25, DT25C, DT30, and DT30C as well as relevant Suzuki DF25 and DF30 variants. It can also be used for Johnson 25 and 30 hp four-stroke motors from 2004-2007, when the motor is of Suzuki origin and has the specified shaft and gearcase configuration.
Compatible motor models
Suzuki DT20, 1983-1988
Suzuki DT25 and DT25C, 1983-2000
Suzuki DF25 and DF25 V-Twin, from 2000
Suzuki DF25R, from 2010
Suzuki DF25A, from 2014
Suzuki DT30 and DT30C, 1983-1997
Suzuki DF30, 2000-2007
Suzuki DF30A, from 2014
Johnson 25 and 30 hp four-stroke, 2004-2007, of Suzuki origin
The correct propeller pitch depends not only on the motor's hp, but also on the motor model, year, gearcase, spline count, boat type, load, and the motor's recommended full-throttle RPM. This variant has a 14″ pitch and right-hand rotation.
Replaces OEM numbers
Suzuki 58100-95D00-019
Suzuki 58100-95D01-019, alternative reference
BRP/Johnson/Evinrude 5032110
Mounting parts
The motor's original mounting parts can be reused if they are suitable and in proper condition. The documented complete hardware kit has manufacturer no. 17042501. Relevant individual parts include SBTW thrust washer, SBSP spacer, YBWS washer, SBNT propeller nut, and 1½″ cotter pin.
Always check the motor/drive model and original part number before purchase.
Important features3-blade Amita 3 aluminum propeller
Propeller diameter: 10″ / 254 mm
Propeller pitch: 14″
Right-hand rotation
10 splines/teeth
For 3″ gearcase with through-propeller exhaust
Fixed pressed-in rubber hub
Black high-gloss lacquered surface
Manufacturer no.: 4211-100-14
