Solas Amita 3 aluminum propeller 15.3 × 21 right-hand rotation, 3-blade for Suzuki 150–250 hp 4-stroke

This Solas aluminum propeller for Suzuki outboard motors is a right-hand rotation Amita 3-E Plus propeller with a diameter of 15.3″, a pitch of 21″, and 15 splines. This variant is designed for Suzuki 4-stroke outboard motors in the 150–250 hp range.

The propeller has three blades and standard right-hand rotation. The Amita 3-E Plus series is designed with larger blades than the standard Amita 3 series and is developed for higher thrust and heavier boats. The choice of diameter and pitch affects the engine's RPM, acceleration, and load, and the dimensions must therefore correspond to the engine and boat setup.

The aluminum construction is manufactured using squeeze casting, which provides a dense and virtually non-porous structure. The surface is protected with four layers of paint and has been salt spray tested for more than 500 hours.

The propeller has a fixed, pressed-in rubber hub and is not intended for an interchangeable RUBEX hub. Exhaust is discharged through the hub. The splines consist of 15 teeth for the proven Suzuki engine group.

Always check the engine's power, model, gearcase, shaft splines, direction of rotation, as well as the diameter and pitch of the existing propeller before purchase. This ensures that the propeller fits the specific engine and boat combination.

Diameter and pitch: 15.3″ × 21″
Rotation: Right-hand
Number of blades: 3
Splines: 15 splines
Material: Aluminum
Series: Amita 3-E Plus
Fixed, pressed-in rubber hub
Through-hub exhaust
Compatibility: Suzuki 4-stroke 150–250 hp