This SOLAS Amita 3 aluminum propeller for Yamaha/Selva outboard motors is a three-blade, right-hand rotation propeller in the size 13 x 19″. It has a 13″ diameter, 19″ pitch, and 15 splines, and is intended for compatible outboard motors with a 4¼″ gearcase and through-hub exhaust.
The propeller is made of aluminum and features a traditional, press-fit rubber hub. The hub is factory-installed, so no separate replaceable hub kit is required. The rubber cushioning can give way under a heavy impact, thereby reducing the risk of load being transferred directly to the gearcase. The three blades are precision-balanced, and the propeller has a high-gloss black finish.
The Amita 3 series of aluminum propellers are manufactured using pressure casting, also known as squeeze-casting, which provides a nearly pore-free aluminum blank. The surface is protected by four layers of coating, and the construction has been salt-spray tested for more than 500 hours. The series is developed with a focus on acceleration and top speed, but the actual performance always depends on the boat, motor, load, and choice of pitch.
Compatible motor models
Selva compatibility includes the Murena 40/60 HP 4-stroke, Marlin 80/100 HP 4-stroke, as well as the Narwal/Tarpon 115 HP 4-stroke.
Yamaha applications include, among others, T50 4-stroke from 1996, 60 HP C60/E60/P60 from 1992-2005, T60 4-stroke from 2003, 70 HP from 1984, F70 4-stroke from 2010, 75 HP C75/E75/P75 from 1994-1999, F75 4-stroke from 2003, 80 HP from 1997, F80 4-stroke from 1999-2002, 85 HP from 1991-1997, 90 HP including C90 from 1984, F90 4-stroke from 1999, and F100 4-stroke from 1999-2002. The propeller is also found in application tables for Yamaha F75B, F90B, F100B, 115/C115/P115, F115 4-stroke, and 130 HP.
Additional compatibility includes selected Tohatsu and Nissan motors with a 4¼″ gearcase and 15 splines, including 60C with large gearcase up to and including 1999, 70C, 70 TLDI 2002-2009, 75 TLDI from 2010, 90 HP 1987-2001, 90 TLDI from 2001, 115 HP 1992-2001, 115 TLDI from 2004, and 120 and 140 HP from 1988-2003. It is also listed for compatible Parsun T75, T80, and T90 models.
Mounting and cross-references
Original mounting hardware can be reused if the parts are correct and in good condition. Mounting kit 17034501 is used for the relevant Yamaha 50-100 HP group, while 17035501 applies to selected 100-130 HP models. The choice must be made according to the specific motor model. Nut, washers, spacer, and cotter pin are not indicated as being included with the propeller.
The manufacturer part number is 3411-130-19. Yamaha cross-references include 6E5-45941-00-EL, 6E5-45941-00-00, 6E5-45941-00, and 68V-45943-00-00. The Tohatsu cross-reference is 3C7-64554-0. Cross-references must be used in conjunction with checking propeller size, gearcase, and shaft and are not in themselves a guarantee of identical original geometry.
Always check the motor model, gearcase, rotation direction, spline count, clearance, engine RPM range, and original part number before purchase.
Key featuresSOLAS Amita 3 fixed-hub aluminum propeller
Size: 13 x 19″
Right-hand rotation (RH)
3 precision-balanced blades
15 splines
For 4¼″ gearcase
Through-hub exhaust
Fixed press-fit rubber hub
High-gloss black finish
Manufacturer part number: 3411-130-19
