Solas HR Titan 3 three-blade stainless steel propeller is a right-hand rotation propeller with a diameter of 13 7/8" and a pitch of 17". The variant is developed for fast planing hulls and features three blades and a fixed, pressed-in rubber hub.
The blades have high rake and cupped geometry. The high rake contributes to bow lift, while the cupping increases grip in the water and reduces slippage. The design is intended for powerful acceleration and high top speed. The propeller is precision-cast in stainless steel, which provides stiff blades and corrosion resistance in maritime environments.
The propeller is mounted on a 15-spline propeller shaft in a 4 1/4" gearcase and is designed for through-hub exhaust. The fixed rubber hub is integrated into the propeller and is not a replaceable Rubex hub. The engine's original mounting hardware must be used unless a documented engine-specific mounting kit is chosen.
Compatible engine models
Suzuki: DF70A from 2009, DF80A from 2009, DF90 2001-2008, DF90A from 2009, DF100 2009-2012, DF100A from 2013, DF100B from 2018, DF100C from 2024, DF115 2001-2012, DF115A from 2013, DF115B from 2024, DF140 2002-2012, DF140A from 2013, and DF140B from 2024.
Johnson/Evinrude/BRP: 90 hp, 115 hp, and 140 hp 4-stroke from 2002-2007 with a 4 1/4" gearcase and 15 splines.
Always check the engine/drive model, gearcase, number of splines, rotation direction, recommended engine RPM range, and original part number before purchase. The correct pitch also depends on the boat, load, and gear ratio.
Replaces OEM numbers
The propeller cross-references to BRP/Johnson/Evinrude 0777024 and 777024 as well as Suzuki 990C0-00610-17P. The Solas manufacturer number is 3451-139-17. Documented aftermarket cross-references include EMP P3451-1400-17, Polastorm 4229-3140-17, and Michigan Wheel 335931.
Supplementary products
For relevant Suzuki engines, the engine-specific mounting kits Solas 17044501 for DF90, DF100, and DF115, Solas 17044502 for DF100A, DF115A, DF140, DF140A, and DF115B, and Solas 17044503 for DF70A, DF80A, DF90A, and DF100B are available. The mounting kits are accessories and are not documented as part of the propeller.
Key featuresThree-blade HR Titan 3 stainless steel propeller
Diameter: 13 7/8"
Pitch: 17"
Right-hand rotation, RH
15 splines and 4 1/4" gearcase
Through-hub exhaust
Fixed, pressed-in rubber hub
High rake and cupped blades
Manufacturer number: 3451-139-17
