This PVC edge profile for fibreglass, wood and metal is a black finishing and protective profile for edges with a material thickness of 3–4 mm. The profile is supplied as a 24 m roll and can be used for edging components made of fibreglass, wood or metal.
The profile is made of PVC with a documented hardness of 55 Shore. The Shore scale is not specified further. The black finish provides a uniform finish around the processed edge.
The cross-section measures A 17 mm in total external width and B 10 mm in total external height. The C-dimension of 3.5 mm describes the opening in the central mounting slot and should not be confused with the overall thickness of the profile.
The central slot has internal gripping edges that hold the profile around the edge. The profile is intended for an edge or material thickness of 3–4 mm; therefore, check the material thickness and the profile's cross-section dimensions before installation.
Key featuresPVC edge profile for fibreglass, wood and metal
Black finish
Hardness: 55 Shore
Cross-section dimensions: A 17 × B 10 mm
Slot opening, C: 3.5 mm
Suitable for 3–4 mm edge or material thickness
Central mounting slot with internal gripping edges
Supplied as a 24 m roll
