This rigid polyethylene blackwater tank with hull-conforming beveling has a capacity of 75 liters and is designed as a fixed holding tank for blackwater and wastewater in marine sanitation systems. The beveled profile makes the tank narrower at the bottom and is designed for placement against the shape of the hull.
The tank is robustly molded from polyethylene. The solid construction and large wall thickness limit the penetration of foul odors through the tank material. The product dimensions are 800 × 430 × 290 mm, while the lower width at the bevel is 220 mm.
On the tank's two end faces, there are female threads in sizes 3/4" and 1 1/2". The connections are used for inlet, discharge, and venting, allowing the tank to be integrated into a fixed blackwater system with fittings, hoses, and a separate discharge solution.
The design includes an inspection opening of approximately 120 mm as well as a position or preparation for a level sensor. The level sensor, pump, macerator, hoses, fittings, and carbon filter are not documented as included parts.
The blackwater tank is manufactured in accordance with ISO 8099 for systems for holding toilet waste on small craft. The cross-reference GS50041 can be used to identify the corresponding tank variant.
Key featuresFixed blackwater tank with 75-liter capacity
Rigid, robustly molded polyethylene
Hull-conforming beveling with 220 mm lower width
Product dimensions: 800 × 430 × 290 mm
Female threads: 3/4" and 1 1/2"
Connections for inlet, discharge, and venting
Inspection opening of approximately 120 mm
Prepared position for level sensor
Manufactured in accordance with ISO 8099
