Description
Freshwater cooling:
Mixing ratio: 1:10 (if necessary, up to 20% system cleaner can be used)
Pour the fluid into the cooling system and start the engine so that the fluid circulates well. It is advisable to take a few trips so that the engine warms up.
Let the liquid work for about 2 days. T
Drain, rinse well and fill with clean water and coolant.
NB: Zinc anodes must be removed before using system cleaner.
Saltwater cooling:
Close the intake valve. Run the engine until it is empty of salt water.
Fill the correct dosage of fresh water and system cleaner on the intake side.
Start the engine and let it run until the mixture comes out of the exhaust (the procedure must be adapted to each engine depending on how the cooling system is constructed). Let the liquid stand for about 2 days.
After cleaning, open the bottom valve and run the engine.
Outboard motor/engine with drive:
Contact your dealer for guidance.
Categories