This Touch SFT multifunction control panel from Tecma is a separate spare part for Generation 1 and Generation 2 electric toilets. The panel uses Smart Flush Technology and controls water supply, flushing, and discharge via the Before Use and After Use touch fields. The Touch SFT version works in conjunction with a remote control unit.
The front is made of tempered high-tech glass and features LED backlighting and a proximity sensor. The backlighting can be set to always on, always off, or automatic activation via the proximity sensor. The panel also includes a cleaning lock with automatic reactivation after 15 seconds, and a shower lock that deactivates operation for 15 minutes to prevent accidental activation from water splashes.
The toilet system can be set to sailing or mooring mode. In sailing mode, the bowl is emptied after the flush cycle, leaving only a small water seal, while mooring mode leaves a small amount of water in the bowl. The flush water volume can be adjusted using the regulator on the back of the panel, and water supply via Before Use can be activated for up to 12 seconds. The system also supports manual activation of the macerator pump without standard water supply, as well as resetting via the tank level area.
The integrated three-color tank level indicator shows system and tank status with green, yellow, and red lighting. When a full tank is detected, further water supply is blocked, while the macerator and discharge pump can still be activated. The blockage can be temporarily bypassed using the Lock Out function. Tank level display and automatic blocking require a compatible and correctly connected tank sensor. The panel supports tank level signaling as well as potential-free contact sensors, electronic sensors, and compatible Tecma sensor systems.
The front measures 118 × 84 mm, and the mounting cutout is 70 × 49 mm. The rear housing is specified with a height of 48 mm, while the profile dimensions are 21 mm for the rear part and 8 mm for the front panel part. The included cable is 1.5 m long. During installation, consideration must be given to wall thickness, cable routing, and the distance between the toilet, panel, and control unit. The control unit must be positioned so that it can be inspected subsequently.
The panel can be used in Tecma toilet systems with both 12 V and 24 V system setups and is documented for G1 and G2. The OEM model is T-PF.P11T2 and is used in, among others, the Compact, Flexi, and Design series. Documented series and models include Nano, Compass, Elegance, Silence, Breeze/E-Breeze, Evolution, Privilege, and X-Light. Always check the toilet model, control unit, wiring harness, tank sensor, and original part number before replacement.
OEM and service components
Complete control panel: T-PF.P11T2
Wall panel/wall switch: T-PF.P11T2/SFT-WS
Controller: T-PF.P11T2/SFT-CTR
Former number: 98122B
Alternative distributor number: 1326222
Important featuresTouch-sensitive multifunction panel with two control fields
Smart Flush Technology with sailing and mooring mode
Front in tempered high-tech glass
LED backlighting with proximity sensor
Three-color tank level indicator and overflow protection
Adjustable flush water volume
Cleaning lock and 15-minute shower lock
Front dimensions: 118 × 84 mm
Mounting cutout: 70 × 49 mm
Cable length: 1.5 m
Always check the toilet model, control unit, wiring harness, and original part number before purchase.
