The bottom floor base is a separate anodized aluminum base for table legs in the Thread Lock system. The base is mounted on the floor, deck, or cockpit sole and provides the lower attachment point for the compatible, removable table leg.
The table leg is screwed into the base using the Thread Lock connection. The screw connection provides a stable assembly while allowing the table leg to be removed after use, while the base remains in the mounting location.
The round flange base is intended for surface mounting without recessing or routing into the substrate. After installation, the base has a projection of 20 mm above the floor. The flange has peripheral mounting holes for fastening.
An extra base makes it possible to move the same compatible table leg between two installation locations, for example, cabin and cockpit. The base is documented for Thread Lock table legs 48.417.60, 48.417.61, 48.417.63, 48.417.64, 48.417.65, 48.417.66, 48.417.67, 48.417.68, and 48.417.70.
Delivery includes only the bottom base. Table leg, tabletop, and other fittings are not included.
Key featuresBottom floor base for Thread Lock table legs
Anodized aluminum in silver finish
Stable Thread Lock screw connection
Surface mounting without recessing
Projection above floor: 20 mm
Makes the table leg removable and movable between installation locations
Supplied without table leg and tabletop
