Trim gauge 0–190 Ω with black dial and polished bezel

Mærke: Osculati SKU: 27.321.20

Price:
Sale price177,00 kr

Description

This trim indicator is an analog, panel-mounted marine instrument for displaying trim position via a sender with a signal range of 0–190 Ω. The variant features a black dial, a polished bezel, and can be used in both 12 V and 24 V installations.

The instrument has selectable red or yellow backlighting. The 5-pin wiring harness uses a blue wire for ground, red for positive supply, black for the trim sender, orange for red backlighting, and yellow for yellow backlighting. Either the orange or yellow wire is connected depending on the desired lighting color.

The front measures Ø57 mm, and the instrument depth is 45 mm. The product table indicates a nominal hole diameter of Ø51 mm, while the installation drawing specifies a panel cutout of Ø52 mm. When cutting, the dimensions in the installation manual should be followed. A minimum of 55 mm free space is required behind the panel, and the permissible panel thickness is 0.5–20 mm.

The instrument is inserted through the panel from the front and secured with a threaded ring from the back. An alignment tab on the instrument housing must be positioned correctly in relation to the panel cutout, after which the wiring harness is connected to the connector on the back. For 24 V installations, the specified voltage-reducing resistors of 150 Ω in the instrument supply branch and 2 kΩ in the lighting branch are used. The supply can be routed via the ignition switch or a separate switch; the switch is not included.

The construction includes IP67 protection, a convex clear anti-fog lens, technopolymer components, and a polished AISI 316 stainless steel front bezel. The rear connection is pre-calibrated and designed with a bayonet connector.

Key features

Analog trim display with signal range of 0–190 Ω
For 12/24 V installations
Black dial and polished bezel
Selectable red or yellow backlighting
Front diameter: Ø57 mm
Instrument depth: 45 mm
Panel cutout according to installation drawing: Ø52 mm
Panel thickness: 0.5–20 mm
Minimum free space behind panel: 55 mm
IP67-protected construction

Did you know?

... that many of our products can be ordered online and picked up in our self-service stores?

See more here: Self-service stores

Did you know

... that many of our items can be ordered online and picked up in our self-service stores?

See more here: Self-service stores

Alpina Marineudstyr

Ask us about the product

Send us your question. The product will automatically be included in your message.

Trim gauge 0–190 Ω with black dial and polished bezel
Trim gauge 0–190 Ω with black dial and polished bezel Item no. 27.321.20

Description

Produkt: Trimindikator
Serie: 27.321-serien
Produkttype: Analogt panelmonteret marineinstrument
Anvendelse: Visning af trimposition
Volt: 12/24 V
Diameter: Ø57 mm frontdiameter
Dybde: 45 mm
Materiale: Technopolymer og AISI 316 rustfrit stål
Farve: Sort skive og blank ramme
IP-klasse: IP67
Montering: Panelmontering med fastgørelsesring fra bagsiden
Signalområde: 0–190 Ω
Nominel huldiameter i produkttabel: Ø51 mm
Paneludskæring ifølge installationstegning: Ø52 mm
Paneltykkelse: 0,5–20 mm
Minimum fri plads bag panelet: 55 mm
Baggrundsbelysning: Valgbar rød eller gul
Linse: Konveks klar antidug-linse
Elektrisk tilslutning: 5-polet ledningsnet med stik
Kompatibilitet: 0–190 Ω trimsender og 12/24 V-installation

Similar products

Recently viewed products