Universal electronic tachometer with hour meter for displaying engine speed from 0–4000 rpm and recording operating hours. The instrument features an analog pointer, white dial, and polished front bezel, and is intended for 12/24 V DC installations.
Engine speed is recorded via the alternator's W-terminal. The integrated backlight can be set to either red or yellow by connecting the corresponding lead to the positive supply. The instrument has a blue lead for ground, red for positive supply, black for speed signal, orange for red illumination, and yellow for yellow illumination.
The instrument has an external diameter of 96 mm and is mounted in a Ø85 mm panel hole. A minimum of 55 mm free depth is required behind the panel, and the mounting system supports a panel thickness of 0.5–20 mm. The rear fastening ring must be removed before insertion into the panel and tightened again after placement.
The housing is made of technopolymer, while the polished front bezel is made of AISI 316 stainless steel. The convex, transparent lens is anti-fog treated, and the instrument has an IP67 protection rating. Signal, supply, and illumination are connected via the multi-pin bayonet connector on the back.
The signal ratio can be calibrated to the engine's actual number of pulses or alternator poles. The setting is performed with the rubber button on the back and can be adjusted from 1.0 to 10.0 in increments of 0.1. For the 0–4000 rpm scale, the indicative values are 1.3 for 4 poles, 2.0 for 6 poles, 2.7 for 8 poles, 3.3 for 10 poles, and 4.0 for 12 poles. The correct value must be determined based on the engine's technical documentation.
If electrical interference causes an unstable speed signal, a series resistor of 1–20 kΩ and ¼–1 W can be used in the signal line. A 20 kΩ potentiometer can be used for testing; the resistor or potentiometer is not documented as included.
Key featuresMeasuring range: 0–4000 rpm
Integrated hour meter
Supply: 12/24 V DC
Signal input via alternator W-terminal
Selectable red or yellow backlight
External diameter: 96 mm
Panel hole: Ø85 mm
Mounting depth: 55 mm
Polished front bezel in AISI 316 stainless steel
Anti-fog treated convex lens
Protection rating: IP67