This universal electronic tachometer with hour meter measures from 0 to 4000 rpm and is designed for 12 or 24 V DC. The variant features a black dial and a polished front bezel, allowing it to be integrated into instrument panels with a matching finish.
The rotational speed is registered via the generator's W-terminal. The signal ratio can be set from 1.0 to 10.0 in increments of 0.1 using the rubber button on the back of the instrument. The selected setting is automatically saved after approximately three seconds of inactivity.
The integrated hour meter records the engine's operating time. The dial has selectable red or yellow backlighting: the yellow wire activates yellow lighting, while the orange wire activates red lighting. Only the wire for the desired lighting color should be connected. The red wire is used for positive supply, blue for negative/ground, and black for the tachometer signal.
The instrument has an outer diameter of 96 mm and is mounted in a panel cutout of Ø85 mm. At least 55 mm of clearance is required behind the panel, and the permissible panel thickness is 0.5–20 mm. The instrument is inserted from the front and secured with the ring on the back.
The housing is made of technopolymer, and the polished front bezel is made of AISI 316 stainless steel. The curved, transparent lens has anti-fog properties, and the instrument is rated IP67. The connection on the back is prepared for a bayonet connector.
The instrument can be used with engine and generator systems that provide a suitable speed signal via the generator's W-terminal. In the event of heavy electrical noise in the signal, a series resistor of 1–20 kΩ and ¼–1 W can be used according to the installation instructions.
Key featuresMeasuring range: 0–4000 rpm
Integrated hour meter
Voltage: 12/24 V DC
Signal via generator's W-terminal
Adjustable signal ratio: 1.0–10.0 in 0.1 increments
Selectable red or yellow backlighting
Outer diameter: 96 mm
Panel cutout: Ø85 mm
Minimum clearance behind panel: 55 mm
IP rating: IP67