Universal fuel level sensor with float arm is a resistive tank sender for measuring fuel levels in tanks. This variant has a sender curve of 240–33 Ω and must be used with a level gauge that accepts the same resistance range.
The sensor's arm construction can be adjusted for fuel tanks with a height of 150–600 mm. A patented damping system delays the movements of the float arm and reduces fluctuations in the level display, which can otherwise occur due to the boat's rolling, pitching, and vibrations.
The metal parts and the 2 mm thick float arm are made of stainless steel. The housing consists of glass-fiber reinforced acetal, while the float is made of low-density polyethylene. The ceramic, scratch-resistant resistive element has a platinum contact and is designed for a service life of 4 million movements.
Connection is via a 6.35 mm Faston terminal and a tinned wire with Teflon protection. The waterproof seal is resistant to hydrocarbons and is therefore suitable for installation in fuel tanks.
The top flange has an outer diameter of approx. 67 mm and is mounted with five approx. 5 mm holes in an asymmetrical pattern on a Ø55 mm bolt circle. The distance from the underside of the flange to the pivot point of the float arm is approx. 136 mm.
Key featuresResistive sender curve of 240–33 Ω
For fuel tanks with a height of 150–600 mm
Adjustable float arm in 2 mm stainless steel
Ceramic, scratch-resistant resistive element with platinum contact
Designed for 4 million movements
Damping against rolling, pitching, and vibrations
6.35 mm Faston terminal
Five-hole flange mounting on Ø55 mm bolt circle
Waterproof seal, resistant to hydrocarbons