Water temperature gauge with a measuring range from 40 to 120 °C for monitoring the water or coolant temperature in the engine's cooling system. This variant features a black dial and a black bezel and is intended for panel mounting as part of the boat's engine instrumentation.
The instrument can be used in 12 or 24 V electrical systems. The dial has selectable red or yellow backlighting, with the light color selected via the relevant wire. The two lighting colors are alternative and are not used simultaneously.
The instrument's external front diameter is 57 mm, and the product depth itself is 45 mm. Product data specifies a mounting hole of Ø51 mm, while the installation diagram shows a panel cutout of Ø52 mm. Therefore, check the instrument and mounting template before cutting. The panel can be 0.5–20 mm thick, and there must be at least 55 mm of free space behind the panel.
Mounting is performed from the front of the panel. The fastening ring is removed before the instrument is inserted through the panel hole and is then tightened from the back. The instrument housing has an alignment tab, which must be taken into account when adjusting the panel hole, and the wiring harness is connected to the back of the instrument.
The five-wire connection system includes a blue wire for ground, red for positive supply, black for the external temperature sensor, orange for red backlighting, and yellow for yellow backlighting. For 24 V installations, the specified resistor configuration must be used with 150 Ω in the supply circuit and 2 kΩ in the lighting circuit.
Key featuresMeasuring range: 40–120 °C
Voltage: 12/24 V
Black dial and black bezel
Selectable red or yellow backlighting
External front diameter: 57 mm
Product depth: 45 mm
Mounting from the front of the panel with a fastening ring on the back
Connection for external temperature sensor