Description
turnbuckle fork/terminal 10mm
A turnbuckle is used to hold and tighten a steel wire rope so that the wire can only move in one direction. They can also be used to fasten a mast to so-called stays to stabilize the mast and thus the boat.
You unscrew the fork and the terminal from each other and tighten them with a nut. Then you mount it in the desired location and tighten the turnbuckle by inserting a thin screwdriver or similar through the small hole in the middle and turning until the wire is fully tensioned.
Danish Blue Wave manufactures their products from a single block of steel, meaning there are no welds and their products can therefore withstand extra stress.
Stainless steel AISI 316 turnbuckles
Specifications
Thread type: M20Length: 587mm
Min length: 427.0 mm