This VDO ViewLine ammeter is an analogue Ø52 mm panel instrument with a black front for monitoring current in 12/24 V DC systems. The centered scale from -60 to +60 A shows both discharge and charge current, allowing the current direction in the electrical system to be read directly.
Measurement is performed via an external 60 A/60 mV shunt. This means that the main current is not routed through the instrument panel; instead, the instrument receives a 60 mV measurement signal from the shunt. The matching shunt has manufacturer no. A2C59514043, and the starter motor current must not be routed through the shunt. The two measuring wires between the shunt and the instrument must be of equal length.
The instrument has a 240° scale with a measurement accuracy of less than 2.5% over the entire display range. The black dial is LED-backlit with amber light, while the needle and integrated warning indicator have red LED lighting. The warning point can be programmed via PC software. The electronics are protected against reverse polarity and overvoltage.
The instrument housing is made of polycarbonate and features a double PMMA lens with anti-fog functionality. The front is rated to IP67, while the rear is rated to IP52 according to IEC 60529. The operating temperature is -30 °C to +80 °C, and the material is fire-rated according to UL94-V0. The product is CE, REACH, and RoHS compliant.
For standard front mounting with Spinlock, a panel hole of Ø53 mm and a panel thickness of 0.5-20 mm are required. Flush mounting requires a hole of Ø48.1 mm and a recommended panel thickness of 1.5-3 mm. The instrument housing depth is 50 mm, and there must be at least 65 mm of free space behind the panel. Keep a distance of at least 500 mm from a magnetic compass.
Connection is via an 8-pole Tyco/Hirschmann MQS connector. The instrument's pin connection differs from other ViewLine instruments, and the relevant wiring diagram must therefore be followed. The supply circuit must be protected with a 5 A fast-acting fuse. The instrument is supplied with a black front ring, while the cable with item no. 27.599.11 and the required shunt are purchased separately.
Key featuresMeasuring range: -60 to +60 A
For 12/24 V DC systems
60 mV signal from external 60 A shunt
Nominal instrument diameter: Ø52 mm
Analogue 240° scale with accuracy under 2.5%
LED-lit dial, needle, and warning indicator
IP67 front and IP52 rear
Front mounting, flush mounting, or bracket mounting
8-pole Tyco/Hirschmann MQS connection
Manufacturer number: A2C59512328