VDO ViewLine oil pressure gauge is an analog engine instrument for monitoring engine oil pressure. The black dial features a dual scale from 0–10 bar and 0–150 psi, as well as a white pointer that provides a clear reading of the oil pressure.
The instrument is designed for nominal 12 V and 24 V installations and has a proven operating voltage range of 8–32 V DC. It uses a 10–184 Ω resistive sensor signal and must be paired with a 10 bar oil pressure sensor that matches the engine's thread, grounding principle, and any alarm function requirements. Sensor not included.
The dial and pointer are LED-backlit, and the instrument has an integrated red LED warning light. Power consumption is less than 150 mA including the warning light. The instrument is protected against reverse polarity and can be connected to an optional external alarm switch.
The instrument diameter and mounting hole are 52 mm, while the outer diameter with the standard round bezel is 59 mm. The installation depth is 50 mm. The included mounting solution is based on a Spinlock nut and rubber gasket and can be used for panel thicknesses from 0.5 to 20 mm. Flush mounting is possible with a separate mounting kit. A safety distance of 0.3 m must be maintained when placed near a magnetic compass.
The instrument housing and black bezel are made of polycarbonate, while the double lens is made of PMMA and designed with anti-fog protection. The front has an IP67 protection rating, and the back has IP52 in the nominal mounting position. The operating temperature is −30 °C to +80 °C, and the instrument is designed for up to 95% relative humidity.
Connection is made via an 8-pin Tyco/Hirschmann MQS connector. The relevant 8-pin cable with item no. 27.599.11 is used for the installation; please check the specific scope of delivery, as the cable cannot be guaranteed as included. The manufacturer number for the instrument is A2C59514111.
Sensor and accessories
The instrument can be combined with a suitable 10 bar sensor with a 10–184 Ω signal. Documented sensor variants include item nos. 27.502.00, 27.563.00, 27.565.00, 27.503.00, 27.507.00, and 27.562.00. The choice depends on the thread, grounded or insulated poles, and the need for an alarm switch.
Interchangeable round, triangular, and flat bezels are available in black, white, and chrome. There are also separate parts for flush mounting, stud mounting, and sealing.
Key featuresAnalog oil pressure display with dual scale: 0–10 bar / 0–150 psi
Black dial with white pointer and LED lighting
Nominal system voltage: 12/24 V
Operating voltage range: 8–32 V DC
Sensor input: resistive, 10–184 Ω
Integrated red LED warning light
Instrument and mounting diameter: 52 mm
Front IP67 and back IP52
8-pin Tyco/Hirschmann MQS connection
Panel mounting or flush mounting