This VDO ViewLine voltmeter is an analog panel instrument for monitoring battery and generator voltage in 24 V DC marine systems. The black dial has a measuring range of 18–32 V, allowing the instrument to track charging voltage and detect signs of abnormally high voltage or potential deep discharge.
The voltage is displayed over a 90° sweep. The scale and pointer are LED-illuminated, and the instrument features an integrated red LED warning indicator. Measurement accuracy is specified with a deviation of less than 3.6 angular degrees across the display range, and the electronics are protected against reverse polarity.
The instrument housing is made of flame-retardant polycarbonate, while the double-layer front lens is made of PMMA. The anti-fog construction reduces the risk of condensation on the display. This variant features a black dial and a matching black round bezel.
The voltmeter is installed in a Ø52 mm panel cutout and requires 50 mm of installation depth. Standard mounting is performed with a spinlock nut and supports a panel thickness of 0.5–20 mm. Alternative mounting with brackets and threaded studs supports a clamping thickness of 2–15 mm, and the instrument can also be flush-mounted with the relevant accessories.
The front is protected to IP67 in the normal mounting position, while the rear is rated IP52. The operating temperature is from –30 °C to +80 °C. Furthermore, the design has been tested for vibrations, mechanical shock, thermal shock, and drops from a height of 1 meter.
Electrical connection is made via an 8-pin Tyco/Hirschmann MQS system. For installation, the instrument must be supplemented with a connector and cable, item no. 27.599.11. The nominal current consumption is less than 150 mA, including the integrated LED warning indicator.
Key featuresAnalog voltage display for 24 V DC systems
Measuring range: 18–32 V DC
Black dial with LED-illuminated scale and pointer
Panel cutout: Ø52 mm
Installation depth: 50 mm
Double anti-fog front lens
IP67-protected front and IP52-protected rear
8-pin Tyco/Hirschmann MQS connection
Protected against reverse polarity
Operating temperature: –30 °C to +80 °C