Vertical level sensor with S3 threaded flange in AISI 316 for measuring liquid levels in fuel and water tanks. This variant has a sensor length of 40 cm and provides a resistive signal of 240–33 Ω to a compatible tank gauge.
The sensor is designed as a vertical rod sensor with a movable, ring-shaped float. The float's position activates the internal resistor chain so that the connected instrument can display the tank's current level. The nominal power rating is 125 mW, the maximum operating current is 300 mA, and the resistance output has a tolerance of ±(R × 1.5% + 1 Ω).
The electrical connection is compatible with 12 and 24 V systems. The black cable is used for the signal, while the blue cable is the common wire. The cable length is 460 ±20 mm. The sensor is rated to IP65 and has a documented operating temperature range from −40 °C to +85 °C.
The construction is made of AISI 316 stainless steel. The sensor length is 400 mm with a tolerance of ±5 mm. The flange head measures Ø53.5 mm, the sensor tube Ø12.7 mm, and the float measures Ø35 × 32 mm. The S3 threaded flange has an external BSP 1 1/4" thread, and the seal uses NBR O-rings.
For mounting, the sensor is screwed into a suitable S3 flange or tank connection. Installation of a receiving S3 flange requires a 50 mm center hole; the flange is normally welded into a thin-walled metal tank or fastened with a gasket and screws on a suitable plastic tank. For tanks with an international five-hole S5 flange, an adapter flange with item no. 52.746.10 can be used. The flange, gasket, and mounting parts are not documented as part of the scope of delivery.
The 240–33 Ω signal can be used with compatible instruments from manufacturers including Teleflex, Aqua Meter, Vetus, S. Giorgio Sein/Veglia, Beede, Medallion, Datcom, and Taiwan-Wena, as well as tank instrument 27.170.00. The connected instrument must support 240–33 Ω. The sensor family is compliant with ABYC H-24, USCG 33 CFR 183.590, and ISO 10088, as well as the EMC Directive 2014/30/EU with the specified EN standards.
Key featuresFor fuel and water tanks
Sensor length: 40 cm
Resistance range: 240–33 Ω
Compatible with 12 and 24 V
AISI 316 stainless steel
S3 threaded flange with BSP 1 1/4" external thread
IP65 and operating temperature from −40 °C to +85 °C
Cable length: 460 ±20 mm
Adapter for S5 flange: item no. 52.746.10