Vertical S5 stainless steel 316 level sensor with a nominal sensor length of 22 cm is designed for the electrical measurement of liquid levels in water or fuel tanks. The sensor uses an analog resistance signal of 0–190 Ω and can be used in both 12 and 24 V systems.
The float moves vertically around the sensor rod in accordance with the liquid level. The resistance is low when the float is in the lowest position and increases to approximately 190 Ω in the highest position. The two-wire connection consists of a blue signal wire for the instrument's S-terminal and a black return/ground wire. The electrical lead is 460 ±20 mm long.
The sensor is made of stainless steel 316 and has a Ø12.7 mm sensor rod. The S5 flange measures Ø69 mm and has five Ø5.5 mm mounting holes on a bolt circle of Ø54 ±0.25 mm. The flange thickness is 3 mm, and the accompanying gasket is made of NBR. The nominal length is 220 mm with a tolerance of ±2 mm.
The sensor is designed for vertical tank mounting and is compatible with relevant 0–190 Ω level instruments, including three-wire Yazaki, Faria Europa, VDO, Uflex, and Guardian. The sensor length must be selected according to the internal height of the tank, and the instrument's resistance range must always be verified before installation.
When mounting in a tank without an existing S5 flange, use the gasket as a template. Mounting requires a 40 mm center hole as well as five screw holes drilled with a Ø4.0–4.2 mm drill bit. Place the sensor and gasket with the wire direction and gasket opening facing the same way, then tighten the screws in a star pattern. The tank must be emptied and cleaned, and drill shavings must be removed during work.
The sensor has IP65 protection and a working temperature range from −40 °C to +85 °C. The nominal power is 125 mW, and the maximum operating current is 300 mA. The construction is suitable for gasoline, diesel, water, wastewater, and alcohol. The product family meets the EMC requirements of 2014/30/EU as well as the RoHS requirements of (EU) 2015/863.
Key featuresFor water and fuel tanks
Analog signal range of 0–190 Ω
Universal for 12/24 V systems
Nominal sensor length of 220 mm
Vertical S5 mounting with 5-hole flange
Stainless steel 316 and NBR gasket
IP65 and working temperature from −40 °C to +85 °C
Compatible with select Yazaki, Faria Europa, VDO, Uflex, and Guardian instruments