This vertical S5 tank level sensor in AISI 316 stainless steel, 0–190 Ω has a nominal sensor length of 17 cm and is used for measuring liquid levels in tanks. The sensor is designed for vertical mounting through the top of the tank and can be used for fuel and water.
The moving float follows the liquid level along the vertical sensor tube and provides a resistance signal of 0–190 Ω. The sensor is compatible with 12/24 V systems, has a power rating of 125 mW and a maximum operating current of 300 mA. The electrical connection is made with two wires.
The sensor tube and flange are made of AISI 316 stainless steel. The sensor tube has an outer diameter of 12.7 mm, while the S5 flange measures Ø69 mm and has five mounting holes. The flange plate is 3 mm thick, and the construction includes an NBR gasket. The sensor's protection rating is IP65, and the documented operating temperature range is from −40 °C to +85 °C.
Mounting requires a center hole of Ø40 mm as well as five screw holes of Ø4.0–4.2 mm. The sensor is fastened with five M5 screws, which are tightened in a star pattern. During installation, the wire direction and the opening in the gasket must face the same way. The connected wire has a length of 460 ±20 mm.
Documented working media include gasoline, diesel, water, wastewater, and alcohol. The sensor complies with the EMC Directive 2014/30/EU as well as EN 61326-1:2013 and relevant EN 61000-6 standards. It is also covered by RoHS Directives (EU) 2015/863 and 2011/65/EU.
Key featuresVertical tank level sensor with moving float
Resistance range: 0–190 Ω
Nominal sensor length: 17 cm
Compatible with 12/24 V systems
Sensor tube and flange in AISI 316 stainless steel
5-hole S5 flange for vertical top mounting
Protection rating: IP65
For fuel, water, and other documented working media