This vertical 316 stainless steel tank level sender with S5 5-hole flange is an analog, float-based sender for measuring liquid levels in fuel and water tanks. This variant has a nominal sender length of 600 mm and provides a 240–33 Ω resistance signal to a compatible level gauge.
The float moves along the vertical sender tube, translating the liquid level into an electrical resistance signal. The sender is designed for 12/24 V installations and can be used for petrol, diesel, water, wastewater, and alcohol. The instrument must support the 240–33 Ω signal range.
The sender is made of 316 stainless steel and features a 12.7 mm sender tube. The nominal length of 600 mm is measured from the underside of the mounting flange to the bottom of the sender rod and has a tolerance of ±2 mm. The operating temperature is −40 °C to +85 °C, and the protection class is IP65.
The S5 flange has an outside diameter of 69 mm, a thickness of 3 mm, and five Ø5.5 mm mounting holes on a Ø54 ±0.25 mm bolt circle. The holes are asymmetrically positioned according to the S5/SAE pattern. The design is specified with an NBR gasket, and installation requires a tank or adapter with a corresponding 5-hole flange. Check the tank’s internal depth and clearance in relation to the sender's length before mounting.
The electrical connection is made via a 460 ±20 mm wire. The connection diagram indicates the blue lead for the level gauge's signal terminal S and the black lead as the return or ground connection. The sender's rated power is 125 mW, and the maximum operating current is 300 mA.
The sender can be used with 240–33 Ω instruments from manufacturers including Teleflex, Aqua Meter, Vetus, S. Giorgio Sein/Veglia, Beede, Medallion, Datcom, and Wema/Wena. The level gauge with item no. 27.160.00 is also documented for this sender family. Variant 27.161.60 has the same nominal length but a signal range of 0–190 Ω and is therefore not a direct electrical replacement. Special lengths can be ordered for minimum quantities of 20 units.
The product family complies with Directive 2014/30/EU and standards EN 61326-1:2013, EN 61000-6:2007, and EN 61000-6:2007/A1:2011/AC:2012. The technical reference also includes QC/T 413-2002.
Key featuresAnalog, vertical, and float-based tank level sender
For fuel, water, wastewater, and alcohol
Resistance signal: 240–33 Ω
Universal for 12/24 V installations
Nominal sender length: 600 mm, L ±2 mm
316 stainless steel and NBR gasket material
S5 5-hole flange with Ø54 mm bolt circle
Sender tube: Ø12.7 mm
Cable length: 460 ±20 mm
Protection class: IP65
Operating temperature: −40 °C to +85 °C