This Vertical tank level sensor 0–190 Ω in 316 stainless steel with S5 5-hole flange is model S5-E280 with a nominal sensor length of 28 cm. It measures the liquid level in fuel and water tanks using a float that moves along the vertical sensor tube.
The sensor provides a 0–190 Ω resistance signal and can be used in 12/24 V systems. The nominal power is 125 mW, and the maximum operating current is 300 mA. The electrical connection is made via a two-wire cable with blue and black conductors. The cable length is 460 ±20 mm.
The construction is made of AISI 316 stainless steel and has an NBR gasket. The sensor tube has an outer diameter of 12.7 mm, while the flange measures 69 mm in outer diameter and has a thickness of 3 mm. The sensor is IP65-rated and intended for operating temperatures from −40 °C to +85 °C. Documented media include gasoline, diesel, water, wastewater, and alcohol.
Mounting is performed using an S5 5-hole flange with a bolt circle of Ø54 ±0.25 mm and flange holes of Ø5.5 mm. When installing in a tank without an existing flange, a central hole of Ø40 mm must be drilled, as well as five screw holes of Ø4.0–4.2 mm. The gasket can be used as a drilling template, and the screws should be tightened in a star pattern.
The sensor is compatible with relevant Yazaki, Faria Europe, VDO, Uflex, and Guardian instruments as well as specified 3-wire models. The electrical resistance range of the instrument must be checked before installation to ensure it matches the sensor's 0–190 Ω signal. The tank depth must also match the sensor length of 280 mm.
The variant-specific calibration for S5-E280 ranges from 0 Ω at a float position of 48 mm to 190 Ω at a float position above 241.5 mm, measured from the top of the sensor. The permitted tolerance for the resistance output is ±(1 Ω + R × 1.5%).
Key featuresVertical tank level sensor for fuel and water
Model S5-E280 with 280 mm sensor length
Resistance signal: 0–190 Ω
Universal for 12/24 V systems
AISI 316 stainless steel with NBR gasket
S5 5-hole flange with Ø54 mm bolt circle
Two-wire cable of 460 ±20 mm
IP65 and operating temperature from −40 °C to +85 °C
Compliance with RoHS and EMC requirements